settime:
SysTime=System Time
SetTime=Set Time
Hour=Hour
Minute=Minute
Second=Second
Month=Month
Day=Day
Year=Year
timezone=Time Zone
dst=Automatically adjust clock for daylight saving changes
SetTimezone=Submit
Manual=Manual
NTPserver=Synchronize with NTP Server
server=Server
interval=Sync Interval
refresh=Refresh
title=Time Settings
err_integer=Please enter a valid integer.
err_intl=Please enter a value between 1 and 1440 for NTP syncronization interval.
err_server=Please input a valid NTP Server domain name.
chg_timezone=Change Timezone?

settings:
title=Administrators Settings
CurLanguage=Language
timeoutsetting=Timeout Settings
Timeout=Idle Timeout
auth=Auth Timeout
minute=mins
en=English
gb2312=Simplified Chinese
big5=Traditional Chinese
x-sjis=Japanese
euc-kr=Korean
fr=French
webadmin=Web Administration
lcd=LCD Panel
enablepin=PIN Protection
pin=PIN
security=Security Settings
enablesa=Enable Single Admin User login
enablesp=Enable Strong Passwords
err_timeout=The timeout must be between 1 and 480 minutes.
err_pin=PIN number must be 6 digits.
err_pin1=Please enter a valid PIN number.
adminport=Web Administration Ports
authd=Firewall Authentication Methods
vdom_admin=Virtual Domain Configuration
alert=The timeout value is invalid.
err_http_port_empty=HTTP port number can not be empty.
err_http_port_range=is not a valid HTTP port number in the range of 1 to 65535.
err_https_port_empty=HTTPS port number can not be empty.
err_https_port_range=is not a valid HTTPS port number in the range of 1 to 65535.
err_conf_sync_port_empty=Config Synchronization port number can not be empty.
err_conf_sync_port_range=is not a valid Config Synchronization port number in the range of 1 to 65535.
vdom_chg=Enabling/Disabling the virtual domain configuration will require you to re-login. Are you sure you want to continue?
relogin=The administration port number has been changed, and you will need to login again.
sp_desc0=Strong password rule:
sp_desc1=1. Between 8-16 characters
sp_desc2=2. Minimum of one upper case and one lower case
sp_desc3=3. Minimum of one numeric
sp_desc4=4. Minimum of one non alphanumeric character
same_port_error=HTTP, HTTPS and Config Synchronization should not have the same port.
http_port_used_error= is used by HTTP by now.
https_port_used_error= is used by HTTPS by now.
conf_sync_port_used_error= is used by Config Synchronization port.
invalid_port=8,22,23 and 43 have been used by the system.
no_sslv3=Disable SSLv3 for Web Administration
sp_desc1_fips=1. Between 15-32 characters
https_cert=HTTPS Server Certificate
select=Please Select...
enablecert=Enable HTTPS Certificate Login
conf_sync=Config-Sync
password_policy=Password Policy
min_len=Minimum length
min_len_invalid="Minimum length" must be a number in the range of 8 to 128.
character_requirements=Character requirements
uppercase=Upper case
uppercase_invalid="Upper case" must be a number in the range of 0 to 128.
lowercase=Lower case
lowercase_invalid="Lower case" must be a number in the range of 0 to 128.
number=Numbers
numbers_invalid="Numbers" must be a number in the range of 0 to 128.
special=Special
special_invalid="Special" must be a number in the range of 0 to 128.
forbid_passwd_reuse=Forbid password reuse
history_passwd_num_help=Number of history passwords that can not be reused
history_passwd_num_invalid="Forbid password reuse" must be a number in the range of 1 to 10.
expiration=Password expiration
days=days
password_expiration_invalid="Password expiration" must be a number in the range of 1 to 999.

admin:
name=Name
hosts=IPv4 Trusted Hosts
ip6hosts=IPv6 Trusted Hosts
permission=Profile
delete=Delete
edit=Edit
password=Change Password
type=Type
local=Local
radius=RADIUS
radius_w=RADIUS+Wildcard
remote=Remote
enwildcard=Wildcard

admindlg:
newAdmin=New Administrator
enradius=RADIUS
enwildcard=Wildcard
radgroup=User Group
editAdmin=Edit Administrator
admin=Administrator
passwd=Password
confirm_passwd=Confirm Password
firstname=First Name
lastname=Last Name
email=Email Address
phonenumber=Phone Number
mobilenumber=Mobile Number
pagernumber=Pager Number
host=IPv4 Trusted Host
ip6host=IPv6 Trusted Host
hostMask=Netmask
name=Name
profname=Access Profile
vd=Administrative Domain
select=Please Select
create_new=Create New...
err_name=Name should Not be blank.
err_pwd=Incorrect password, please try again.
err_pwd1=Please enter a password.
err_pwd2=Spaces are not allowed in the password.
err_pwd3=For security reasons, it is better to choose a password that is at least 6 characters long.
err_char=The following characters are not allowed: ~ , ! @ # $ % ^ & * + ` \' \" : ( ) [ ] { } < > | \\ /
err_ip=is not a valid IP address.
err_mask=is not a valid netmask.
err_char2=The legal characters are numbers(0-9), letters(A-Z, a-z) and special characters - and _.
err_space=Spaces are not allowed.
err_pwd_match=The password entries do not match.
err_profile=Please select an access profile.
admin_type=Type
admin_usergrp=Admin User Group
admin_wildcard=Wildcard
local-user=Local User
remote-user=Remote User
global=Global
scope=Scope
force_chgpwd=Force Password Change
force_chgpwd_title=Force this administrator to change password next time they login
pwd_length_tip=The maxlength is 128

admindel:
title=Confirm Delete
confirmation=Are you sure you want to delete admin user:

adminpwd:
title=Edit Password
admin=Administrator
oldpwd=Old Password
newpwd=New Password
conpwd=Confirm Password
err_pwd=The password entries do not match.
err_pwd1=Please enter a password.
err_pwd2=Spaces are not allowed in the password.
err_pwd3=For security reasons, it is better to choose a password that is at least 6 characters long.
pwd_length_tip=The maxlength is 128

loginchangepwd:
newpwd=New Password
conpwd=Confirm Password
password_expired=Your password is expired, please input a new password.
pwd_policy_msg=New password must conform to policy:
min_upper_case=Upper Case Letters
min_lower_case=Lower Case Letters
min_non_alph=Non Alphanumerics
min_number=Numerics
min_length=Minimum length
history_pwd_number=Nonreusable history passwords
no_restric=No Restriction
login_title=Change Password
access_err=The current user do not have permission to change password.
not_match_policy=Your password does not conform to the password policy, please input a new password.
msg_force_chgpwd=You are required to change your password.
force_chgpwd_policy_msg=New password must include:
msg_pwd_change=This account is using the default password, it is strongly recommended that you change your password.
change_password=Change Password
later=Later

admin_profile:
name=Profile Name
modify=Modify
delete=Delete Profile
edit=Edit Profile

profiledlg:
name=Profile Name
new=New Access Profile
edit=Edit Access Profile
control=Access Control
none_all=None
read_all=Read Only
read_write_all=Read-Write
vdomgrp=Virtual Domain Management
mntgrp=Maintenance
admingrp=Admin Users
updategrp=FortiGuard Update
authusergrp=Auth Users
sysgrp=System Configuration
netgrp=Network Configuration
loggrp=Log & Report
webgrp=Webfilter Configuration
spamgrp=Spamfilter Configuration
routegrp=Router Configuration
traroutegrp=Server Policy Configuration
xmlgrp=XML Protection Configuration
wafgrp=Web Protection Configuration
learngrp=Autolearn Configuration
wadgrp=Web Anti-Defacement Management
wvsgrp=Web Vulnerability Scan Configuration
mlgrp=Machine Learning Configuration

profiledel:
wvsgrp=Web Vulnerability Scan Configuration
mlgrp=Machine Learning Configuration

profiledel:
title=Confirm Delete
confirmation=Are you sure you want to delete access profile:

ha:
ha=High Availability
standalone=Standalone Mode
mode=Mode
mode_aa=Active-Active-Standard
mode_ap=Active-Passive
mode_cluster=Active-Active-High Volume
password=Password
retype=Retype Password
group=Group ID
priority=Unit Priority
notes_pri=The unit with the highest priority will be HA master.
override=Override master
enable=Enable
schedule=Schedule
sch_none=None
sch_hub=Hub
sch_lconn=Least-Connection
sch_rrobin=Round-Robin
sch_wrrobin=Weighted Round-Robin
sch_random=Random
sch_ip=IP
sch_ipport=IP Port
intf=Interface
intf_hb=Priorities of Heartbeat Device
intf_mon=Monitor Priorities
prio=priority
err_pwd_match=The password entries do not match.
err_pwd1=Please enter a password.
err_pwd2=Spaces are not allowed in the password.
err_pwd3=For security reasons, it is better to choose a password that is at least 6 characters long.
alert_msg=HA is initializing and will be available in several seconds.
hamsgen=The web-based manager has changed. Please refresh your browser after the system enables HA.
hamsgds=The web-based manager has changed. Please refresh your browser after the system disables HA.
member=Cluster Members

ha_monitor:
serialno=Serial No.
uptime=Uptime
days=days
hrs=hours
mins=minutes
monitor=Monitor
master=MASTER
slave=Standby
cluster_member=Cluster Member
hostname=Hostname
role=Role
priority=Priority
vcluster1=Virtual Cluster 1
vcluster2=Virtual Cluster 2
vdoms=Virtual Domains
disconnect=Disconnect from cluster
download=Download Debug Log

ha_peer:
title=HA Peer Configuration
hostname=Peer
priority=Priority

ha_disconnect:
header=Disconnect Cluster Member
serialno=Serial Number
interface=Interface
ipmask=IPv4/Netmask
ip6mask=IPv6/Netmask
err_ipmask=Please enter a valid IP/netmask.
warn_vzone=Warning: Some vzone is exist, it is best to unplug the cable of vzone or take some measures to prevent network loop!
disconnect_tips=You need to wait a little while to refresh the page after disconnect.

ha_cluster:
title=High Availability
mode=Mode
ha_standalone=Standalone
ha_aa=Active-Active
ha_ap=Active-Passive
unit_priority=Device Priority
vcluster1=Virtual Cluster 1
vcluster2=Virtual Cluster 2
cluster_settings=Cluster Settings
group_name=Group Name
passwd=Password
heartbeat_interface=Heartbeat Interface
need_heartbeat_interface=At Least one heartbeat interface is required
ses_pickup=Enable Session Pick-up
mondev=Port Monitor
vdom=VDOM Partitioning

hacluster:
cluster=Cluster ID
uptime=Up Time
status=Status
days=days
hours=hours
minutes=minutes
seconds=seconds
local=Local
weight=Weight
cpu_usage=CPU Usage
mem_usage=Memory Usage
ses_usage=Active Sessions
net_usage=Network Utilization
vir_usage=Virus Detected
intr_usage=Intrusion Detected
tpacket=Total Packets
tbyte=Total Bytes
monitor=Monitor
refresh=Refresh every
back=Back to HA topology page >>
back_manager=Back to Manager Topology page >>
unit=Unit
none=None
logdisk_usage=Log Disk Usage
http_connect=HTTP Connections
total_connect=Total Connections
total_connect_sec=Total Connections/Sec
http_throughput=HTTP Throughput
throughput=Throughput
mode=Mode
server=Server
client=Client
ha_multi_group=Multi-Cluster Group
ha_multi_group_role=Multi-Role
ha_role=HA Role

download:
title=System Setting Backup
info_confirm=Backup system settings
return=Return
dldebuglog=download debug log

upload:
title=Restore System Setting
upfile=Upload File
msg=Settings successfully uploaded.
sys_reboot=Please wait while the system restarts.
err_blank=No file name specified.
send_to_slave=Sending config file to the standby. Please wait...
slave_up_success=Peer device restart finished, I can upgrade.
client_up_success=Client have received the new firmware file, I can upgrade.
send_up_timeout=Send timeout..., upgrade the standby device fails.
slave_down_success=Peer device restart finished, I can downgrade.
send_down_timeout=Send timeout..., downgrade the standby device fails.

upgrade:
title=Firmware Upgrade/Downgrade
title_up=Firmware Upgrade
partition=Partition
from=From
disk=Local Hard Disk
usb=USB Disk
UpdateFile=Upload File
message=Please refresh your browser in a few minutes.
err_blank=Please enter a filename.
err_usb_file=No firmware file exists on USB disk.
send_to_slave=Sending the new firmware file to the standby. Please wait and keep the web GUI untouched...
slave_up_success=Peer device restart finished, I can upgrade.
send_up_timeout=Send timeout..., upgrade the standby device fails.
slave_down_success=Peer device restart finished, I can downgrade.
send_down_timeout=Send timeout..., downgrade the standby device fails.
send_sig_to_slave=Sending the new-signature file to the standby. Please wait...
send_sig_success=Slave device update signature finished.
send_sig_timeout=Send timeout..., update the standby device fails.
msg_up=Please refresh your browser in a few minutes.
msg_down=Please refresh your browser in a few minutes.
titledown=Firmware Downgrade
msg_wait=Another upgrade is running, please wait for the operation finished.
msg_up_failed=HA main cannot get upgraded standby connection, do you want to continue main one upgrading by force
title_up_dbg=Upload
send_dbg_to_slave=Upload the debug symbol file to the standby. Please wait...
send_dbg_success=Upload the debug symbol file to slave device finished.

send_to_client=Sending the new firmware file to the client. Please wait and keep the web GUI untouched...
send_up_client_timeout=Send timeout..., upgrade the client device fails.
send_down_client_timeout=Send timeout..., downgrade the client device fails.
send_sig_to_client=Sending the new-signature file to the client. Please wait...
send_sig_client_timeout=Send timeout..., update the client device fails.
msg_up_client_failed=HA main cannot get upgraded client connection, do you want to continue main one upgrading by force
send_dbg_to_client=Upload the debug symbol file to the client. Please wait...
send_dbg_client_success=Upload the debug symbol file to client device finished.
send_sig_client_success=Client device update signature finished.
client_up_success=Client have received the new firmware file, I can upgrade.
client_down_success=Client have received the new firmware file, I can downgrade.

upgradecfm:
confirm_downgrade_def=This operation will downgrade the current firmware version. The system configuration will be set to default. Are you sure you want to continue
confirm_downgrade=This operation will downgrade the current firmware version. Database needs to rebuild after downgrade. Are you sure you want to continue
confirm_not_sig=Image RSA signature is invalid.  Do you want to continue to upgrade
confirm_not_key=Image RSA signature has new key.  Do you want to continue to upgrade
confirm_not_cc=The new image does not support CC mode.  Do you want to continue to upgrade
titleup=Firmware Upgrade
msg_up=Software upload has completed and upgrading has begun. Please refresh your browser in a few minutes.
msg_down=Software upload has completed and downgrading has begun. Please refresh your browser in a few minutes.
titledown=Firmware Downgrade

snmp:
snmp=SNMP Agent
desp=Description
loca=Location
cont=Contact
enable=Enable
comm=SNMP v1/v2c
name=Name
query=Queries
trap=Traps
delete=Delete
edit=Edit
err_system='+' is not allowed in system location.
err_contact='+' is not allowed in contact information.
err_empty=should not be empty.
err_space=Spaces are not allowed.
err_char=Invalid characters.
err_ip=is not a valid IP address.
user_name=User Name
security_level=Security Level
noauth_nopass=No Authentication, No Privacy
auth_nopass=Authentication, No Privacy
auth_pass=Authentication, Privacy
snmp_v3=SNMP v3
down_mib=Download FortiWeb MIB File
down_core_mib=Download Fortinet Core MIB File

snmp_comm:
new=New SNMP Community
edit=Edit SNMP Community
add=Add
name=Community Name
host=Hosts:
ip=IP Address
interface=Interface
delete=Delete
protocol=Protocol
port=Port
enable=Enable
local=Local
remote=Remote
query=Queries:
trap=Traps:
event=SNMP Traps
cpu_over=CPU usage is high
mem_low=Memory usage is high
virus_found=Virus detected
ha_chg=HA cluster status changed
ip_chg=Interface IP changed
mgmt_ip_chg=Management IP changed
log_low=Log disk space low
ha_hb_fail=HA heart beat failed
policy_change=Policy changed
ips_sig=IPS Signature
ips_anom=IPS Anomaly
tunup=VPN tunnel up
tundown=VPN tunnel down
sys_ha_hbfail=HA heartbeat failed
sys_mode_change=Operation mode changed
policy_start=Policy enabled
policy_stop=Policy disabled
pserver_failed=Physical/domain server offline
xml_intrusion_attack=XML intrusion trap
xml_schema_attack=XML schema trap
xml_filter_attack=XML filter trap
xml_sigenc_attack=XML signature encode trap
xml_wsdl_attack=XML WSDL trap
xml_sql_attack=XML SQL trap
waf_amethod_attack=Unallowed HTTP method detected
waf_access_attack=Invalid page order detected
waf_spage_attack=Invalid start page detected
waf_pvalid_attack=Invalid parameter detected
waf_blist_attack=WAF black list trap
waf_wlist_attack=WAF white list trap
waf_blogin_attack=Brute force login detected
waf_robot_attack=WAF robot control trap
waf_xss_attack=WAF XSS trap
waf_sql_attack=WAF SQL trap
waf_exploit_attack=WAF Common Exploits trap
waf_disclosure_attack=WAF disclosure trap
waf_url_access_attack=Invalid URL access detected
waf_signature_attack=Attack detected by signatures
netlink_on_status=Network link up
netlink_down_status=Network link down
waf_hidden_fields=Invalid hidden field detected
waf_white_page=WAF white page
max_entry=The maximum number of hosts is 8.
err_name=Please enter a valid name.
err_space=Spaces are not allowed.
err_char=The following characters are not allowed: ~ , ! @ # $ % ^ & * + ` \' \" : ( ) [ ] { } < > | \\ /
sys_ha_cluster_status_changed=HA cluster status is changed
sys_ha_member_up=HA member join
sys_ha_member_down=HA member leave
power_supply_failure=Power supply failure detected

snmp_comm_del:
title=Confirm Delete
confirmation=Are you sure you want to delete SNMP community:

snmp_user:
new=New SNMP User
edit=Edit SNMP User
add=Add
name=User Name
secure_level=Security Level
no_auth=No Authentication, No Privacy
auth_no_pri=Authentication, No Privacy
auth_pri=Authentication, Privacy &nbsp;
auth_proto=Authentication Algorithm
priv_alg=Privacy Algorithm
password=Password
MD5=MD5
SHA1=SHA1
AES=AES
DES=DES
AES256=AES256
host=Hosts:
ip=IP Address
interface=Interface
delete=Delete
protocol=Protocol
port=Port
enable=Enable
local=Local
remote=Remote
query=Query:
trap=Trap:
event=SNMP Traps
cpu_over=CPU usage is high
mem_low=Memory usage is high
virus_found=Virus detected
ha_chg=HA cluster status changed
ip_chg=Interface IP changed
mgmt_ip_chg=Management IP changed
log_low=Log disk space low
ha_hb_fail=HA heart beat failed
policy_change=Policy changed
ips_sig=IPS Signature
ips_anom=IPS Anomaly
tunup=VPN tunnel up
tundown=VPN tunnel down
sys_ha_hbfail=HA heartbeat failed
sys_mode_change=Operation mode changed
policy_start=Policy enabled
policy_stop=Policy disabled
pserver_failed=Physical/domain server offline
xml_intrusion_attack=XML intrusion trap
xml_schema_attack=XML schema trap
xml_filter_attack=XML filter trap
xml_sigenc_attack=XML signature encode trap
xml_wsdl_attack=XML WSDL trap
xml_sql_attack=XML SQL trap
waf_amethod_attack=Unallowed HTTP method detected
waf_access_attack=Invalid page order detected
waf_spage_attack=Invalid start page detected
waf_pvalid_attack=Invalid parameter detected
waf_blist_attack=WAF black list trap
waf_wlist_attack=WAF white list trap
waf_blogin_attack=Brute force login detected
waf_robot_attack=WAF robot control trap
waf_xss_attack=WAF XSS trap
waf_sql_attack=WAF SQL trap
waf_exploit_attack=WAF Common Exploits trap
waf_disclosure_attack=WAF disclosure trap
waf_url_access_attack=Invalid URL access detected
waf_signature_attack=Attack detected by signatures
netlink_on_status=Network link up
netlink_down_status=Network link down
waf_hidden_fields=Invalid hidden field detected
waf_white_page=WAF white page
max_entry=The maximum number of hosts is 8.
err_name=Please enter a valid name.
err_space=Spaces are not allowed.
err_char=The following characters are not allowed: ~ , ! @ # $ % ^ & * + ` \' \" : ( ) [ ] { } < > | \\ /
err_auth_pwd=Password should not be blank.
err_priv_pwd=Password should not be blank.
sys_ha_cluster_status_changed=HA cluster status is changed
sys_ha_member_up=HA member join
sys_ha_member_down=HA member leave
power_supply_failure=Power supply failure detected

update:
lic_info=License Information
lic_contract=Contract
lic_status=Status
registration=Registration
lic_sc=Support Contract
fds_na=Unreachable
login=Login
launch=Launch Portal
register=Register
registered=Registered
unregistered=Unregistered
update=Update
change=Change
detail=Details
renew=How To Renew
config=Configure
subscribe=Subscribe
nolic=Not Registered
exp=Expires
expd=Expired
st_ok=Service is reachable.
st_na=Service is not reachable.
st_disabled=Service is expired or not paid for.
updated=Updated
availability=Availability
slevel=Support Level
contract=Valid Contract
fwdbopts=FortiWeb Update Service Options
lic_fwdb=Security Service
lic_irdb=IP Reputation
lic_avdb=Antivirus
lic_hcdb=Credential Stuffing Defense
reg_av=Regular Virus Database Version
ext_av=Extended Virus Database Version
eng_av=Virus Engine Version
sig_build_number=Signature Build Number
hcdb_ver=Credential Stuffing Defense Database Version
lic_sus_service=FortiWeb FortiGuard Subscription Services
notes=(IP or Domain Name)
period=Scheduled Update
auto=Allow Push Update
auto_msg=You must register your firewall unit in order for Push Update to work. Please visit www.fortinet.com/support/register and follow the directions to register.
update=Update
daily=Daily
weekly=Weekly
monthly=Monthly
last=Last update attempt
no_last=No previous update.
fortidstnet=FortiGuard Distribution Network
pushupd=Push Update
avail=available
notavail=not available
oversvradr=Override default FortiGuard address
avdef=FortiGuard - AV Definition
aveng=FortiGuard - AV Engine
atkdef=FortiGuard - Intrusion Definition
atkeng=FortiGuard - Intrusion Engine
overip=Use override push IP
port=Port
every=Every
hour=hour
minute=minute
day=day
minafter=minutes after the hour
testnet=Test Network Connectivity
version=Version
expdate=Expiry date
status=Last Update Status
installed=Installed updates
noupdates=No updates
networkerr=Network error
unauth=Unauthorized
unreg=Not registered
installfail=Installation failed
genfail=Generic failure
unknown=Unknown
confirm=This might take a few minutes, do you want to continue?
title_up=Update in Progress
message=Your update request has been sent. Your database will be updated in a few minutes. Please check your update page for the status of the update.
refresh=Refresh
update_now=Update Now
updating=Updating...
last_time=Last Update Time
last_method=Last Update Method
manual=Manual
scheduled=Scheduled
push=Push
ha_daemon=HADaemon
virus_database=FortiWeb Virus Database
version=Version
description=Description
Regular=Regular Virus Database
signature=Included Signatures
grayware=Included Grayware Signatures
description1=This virus database includes "In the Wild" viruses and most commonly seen viruses on the network. For regular virus protection, it is sufficient to use this database.
Extended=Extended Virus Database
description2=This virus database includes both "In the Wild" viruses and a large collection of "zoo" viruses that are no longer seen in recent virus studies.
description3=The use of this database can be enabled in the Protection Profile. It is suitable for an enhanced security environment.
fortisandbox=Use FortiSandbox Malware Signature Database
description4=Use Signature Database from  FortiSandbox to Supplement the AV Signature Database.
uncomp_size_limit=Maximum Antivirus Buffer Size
size_limit_tip=is not a valid size limit value.\nthe max antivirus buffer size must be in 1~102400.
size_limit_tip_2=is not a valid size limit value.\nthe max antivirus buffer size must be in 1~204800.
size_limit_tip_common=is not a valid size limit value.\nthe max antivirus buffer size must be in 1~%d.
confirm_check=Change this option will restart all policies!
update_status=Current update status
stop_download=Stop Download
started_at=started at
done=done
task_start=Update daemon is start up
task_idle=Update daemon is currently idle
task_speed_test=Update daemon is doing speed test of the FDS servers
task_setup=Update daemon is doing setup with FDS server
task_down_major=Update daemon is downloading the essential packages
task_down_minor=Update daemon is downloading the anti-virus packages
task_install=Update daemon is installing packages
fortimanager_ip=FortiManager Address
fortimanager_port=FortiManager Port
sunday=Sunday
monday=Monday
tuesday=Tuesday
wednesday=Wednesday
thursday=Thursday
friday=Friday
saturday=Saturday
updpush=Allow Push Update
overpush=Use Override Push
updpush_ip=IP
updpush_port=Port
fortiguard_info=FortiGuard Information
vm_license=VM License
valid=Valid
invalid=Invalid
lic_geodb=Geo DB
geodb_ver=Geo Database Version
update_time=Update Time

fmdlg:
fmg=FortiManager Settings
enable=Enable
id=ID
ip=IP
err_ip=is not a valid IP address.
err_id_blank=Please enter the ID of your FortiManager device(serial number).
err_ip_fmg=Please enter the IP address of your FortiManager device.

mode:
title=Mode
mngip=Management IP/Netmask
op_mode=Operation Mode
nat=NAT
transparent=Transparent
natip=Interface IP/Netmask
natdev=Device
gw=Default Gateway
gwdev=Gateway Device
err_ipmask=is not a valid IP/netmask.
err_ip=is not a valid IP address.

alertmsg:
title=Fortigate Alert Message
disk_title=Format Log Disk
disk_fmt=Format disk now
disk_later=Remind me later
disk_msg1=Fortinet recommends that you format the FortiGate hard disk.
disk_msg2=Taking this action ensures that data formats are synchronized with the 2.80 firmware.
disk_msg3=Formatting the hard disk erases all data on the disk including log messages and quarantined files.
disk_msg4=Formatting takes a few minutes and restarts the FortiGate unit.
pwd_title=Change Your Password
pwd_msg1=It is not safe to use the default administration password.
pwd_msg2=You should
pwd_msg3=change your password
pwd_msg4=for administration access immediately.
hidemsg=Do not show me again.
reg_title=Register Your Product
reg_msg1=Please register your FortiGate unit now to ensure that you receive the latest antivirus, grayware,
reg_msg2=and attack signature updates and so that Fortinet can contact you when firmware updates are available.
reg_msg3=To register your FortiGate unit, go to
reg_link1=System->Maintenance->Support->FDS Registration
reg_msg4=and follow the directions.
reg_msg5=If you need to modify your registration information, go to
reg_msg6=and enter your login name and the password that was emailed to you follwing your initial registration. Thank you.
close=Close


haconfig:
ha=High Availability Configuration
mode=Mode
effective=Effective HA mode
mode_ap=Active-Passive
mode_slave=BACKUP
mode_standalone=Standalone
mode_cluster=Active-Active-High Volume
group_id=Group ID
device_name=Group-name
device_priority=Device Priority
overwrite=Override
ha_mgmt_status=Reserved Management Interface
config_sync=Config file sync
flag_enable=ENABLE
flag_disable=DISABLE
device=Sync device
secdev=Sync second device
hb_interval=Detection Interval
hb_threshold=Heartbeat Lost Threshold
arps=ARP/NS Packet Numbers
arp_interval=ARP/NS Packet Interval(sec)
limit_interval=(100ms)is not valid value\nDetection interval must be in 1~20(100ms).
limit_threshold=is not valid value\nLost threshold must be in 1~60.
limit_groupid=is not valid value\nHA synchronize group ID must be in 0~63.
limit_arps=is not valid value\nARP packet number must be in 1~16.
limit_device_priority=is not valid value\nDevice Priority must be in 0~9.
limit_arp_interval=is not valid value\nARP Packet Interval must be in 1~20.
sync_device_exam=Heartbeat device can not be same as heartbeat second device.
null_device=Do not use
cluster_settings=Cluster Settings
heartbeat_interface=Heartbeat Interface
need_heartbeat_interface=At Least one heartbeat interface is required.
max_monitors_interface=Maximum
max_monitors_interface2=monitors interfaces are allowed.
ses_pickup=Enable Session Pick-up
mondev=Port Monitor
priority=Priority(0-512)
device=Primary
device2=Secondary
interval_unit=(100ms)
close_fo=This operation will close the Fail-open.
ha_member=HA Member
host_name=Host Name
serial_number=Serial Number
priority=Priority
ha_role=HA Role
monitor_tips=Notice: Before enabling port monitoring make sure the interface is connected and the link is up. Unexpected HA fail overs can occur if the link is down upon HA configuration.
mode_aa=Active-Active-Standard
show_ha_topo=Show HA Topology
ha_mgmt_port=Interface
gateway=Gateway
ipv6_gateway=IPv6 Gateway
session_pickup=Session Pickup
persist_sync=Layer 7 Persistence Synchronization
monitor=Monitor Interface
hb_intf=Heartbeat Interface
err_msg_interface=Monitor interface can not be same as heartbeat interface.
msg_hb_limit=Set up 2 heartbeat interfaces at most.
ha_azure_status=Azure Resource Setting
resouce_group=Resource Group Name
sub_id=Subscription ID
tenant_id=Tenant ID
passwd=Application Password
app_id=Application ID
nic1=Interface Name in FWB VMA
nic2=Interface Name in FWB VMB
tunnel_local=Local IP Address
tunnel_remote=Peer IP Address
eip_addr=Elastic IP Address
eip_aid=Elastic IP Allocation ID
eip_aid_tip=Required for EC2-VPC
download_shell=Download Fortiweb Azure Resource Setting Powershell
test_azure=Test for Azure Resource Setting
test=Test
apply_res_tip=In Azure platform if you set HA Mode to Active-Passive, you must config System->Config->Fabric Connectors. Because Fortiweb need notify actively Azure platform to change LoaderBalancer Backend pools when Fortiweb happen failed-over.
apply_oci_res_tip=In OCI platform if you set HA Mode to Active-Passive, you must config System->Config->Fabric Connectors. Because Fortiweb need notify actively OCI platform to change LoaderBalancer Backend pools when Fortiweb happen failed-over.
test_success=Test Azure platform resource setting successfully.
test_failed= Test Azure platform resource setting failed.
network_settings=Networking Settings
network_type=Network Type
flat=Flat
udp_tunnel=UDP Tunnel
ha_phlck_status=HA Health Check
ha_multi_group_status=Multi-Cluster
ha_multi_group=Multi-Cluster Group
primary=Primary
secondary=Secondary
ha_multi_group_switch_by=Switch by
nodes_availability=Nodes Availability
policies_availability=Policies Availability
ha_multi_group_move_primary_cluster_tip=Move to Primary Cluster Group When Nodes Availability or Policies Availability of Primary Cluster Group is Equal to Secondary Cluster Group
ha_multi_group_role=Multi-Role
ha_multi_group_status_err_tips=The multi cluster status should be unset first,and please click Apply.
mode_manager=Manager
role=Role
server=Server
client=Client
server_ip=IP
server_type=Server Type
server_port=Server Port
config_sync_port=Config Sync Port
err_ip=IP must be set.
port_val_lim=is not valid port value\nPort number must be in 1~65535
change_mode_tip=Change HA mode will delete HA Static Route and HA Policy Route!
change_mode_tip_for_sr=Change HA mode will delete HA Static Route!
disable_mgmt_tip=Disable Reserved Management Interface will delete HA Static Route and HA Policy Route!
Select Entries=Select Entries

customizeconsole:
customize_title=Console Preferences
customize_preview=Preview:
customize_color_scheme=Color scheme
customize_text=Text
customize_bg=Background
customize_buf_len=Console buffer length
customize_lines=lines
customize_font=Font
customize_size=Size
customize_reset_btn=Reset Defaults
customize_apply=Apply these settings
customize_pconly=locally on this PC (same kind of browser)
customize_profile=to the Fortigate administrator's profile
customize_show_cmd=Use external command input box
customize_buff_empty=Buffer length shouldn't be empty.
customize_buff_invalid=is not a valid buffer length.

sync:
sync_header=Config Synchronization
ip=Peer FortiWeb IP
password=Peer FortiWeb 'admin' user password
port=Peer FortiWeb Port
sync_type=Synchronization Type
sync=Push config
partial_sync=Partial
full_sync=Full
err_ip=is not a valid IP.
testip=Test
ip_avaliable=Service is available...
ip_not_avaliable=Service isn't available...
sync_apply=Config. Synchronization Result
connect_fails=Connection failed. Please check the target FortiWeb's IP address and listening port number.
auth_fails=Authen fails, please check password.
ver_fails=Version fails, please check HW or Software Version.
lsync_fails=Denied. Syncing data must be done with a remote FortiWeb gateway.
sysmode_fails=System mode difference, please fix them to same before synchronize.
adomenabled_fails=The peer FWB enabled adom, and synconf does not supported adom.
license_fails=The license of peer VM Fortiweb is not valid.
send_file_fails=Send file fails, please check file info.
server_merge_file_fails=Server merge file fails, please check file info.
unknown_error=Unknown Error.
synconf_success=Config. Synchronized Successfully.
sync_confirm_str=All similar name rules/policies will be overridden. Are you sure you want to sync?
invalid_port=8,and 43 have been used by the system.
auto_sync=Auto-Sync
every=Every
daily=Daily
weekly=Weekly
day=day
hour=hour
min=minute
sunday=Sunday
monday=Monday
tuesday=Tuesday
wednesday=Wednesday
thursday=Thursday
friday=Friday
saturday=Saturday
err_min=The time interval of auto confsync shouldn't be shorter than 5 minutes.
reset=Reset
reset_msg=Are you sure you want to reset to default configuration?
run_push=Pushing configuration, please wait a moment
local_ip_fails=This is local IP address, please check it.

global:
title=Share IP
enable_share_ip=Enable Share IP

advanced:
title=Advanced
share_ip=Shared IP
circulate_url_decode=Recursive URL Decoding
max_cache_size=Maximum Body Cache Size
cache_val_limit=is an invalid value.\nThe max cache size value must be an integer within 32~4096.
disable_client_side_ssl=Disable Client-Initiated SSL Renegotiation
disable_ssl_tip=Ignores client requests for SSL/TLS renegotation to protect against DoS attacks that use the disproportionate server-side computing burden during SSL/TLS renegotiation.
rc4_cipher_suite=Prioritize RC4 Cipher Suite
suite_tip=Offers the RC4 cipher suite first during the SSL/TLS handshake. Protects against the BEAST atack. Reverse Proxy and True Transparent Proxy deployments only.
share_ip_tip=Detects source IP addresses that are shared by multiple clients.
decode_tip=If request URLs are encoded multiple times, decodes until the URL is no longer encoded. May decrease performance.
cache_tip=Limits the maximum size for body compression, decompression, rewriting and XML detection. Increasing the body cache may decrease performance.
console_down=Debug Log
down=Download
max_http_header_len=Maximum HTTP Header Length
max_http_upfile_num=Maximum HTTP Upfile Number
max_http_arg_buf_len=Maximum HTTP argument buffer length
max_http_amf_cache_size=Maximum amf cache size for parse amf content
max_http_av_cache_size=Maximum av cache size for upload file
size_8k=8k-cache
size_12k=12k-cache
size_16k=16k-cache
size_32k=32k-cache
size_64k=64k-cache
max_dlp_cache_size=Maximum DLP Cache Size
dlp_cache_tip=The maximum size scanned by DLP. To further increase this buffer, increase Max. Body Cache Size. (This buffer must be less than Maximum Body Cache Size. ) Increasing the size may decrease performance.
dlp_cache_val_limit=is an invalid value.\nThe max DLP cache size value must be an integer within 1~100.
decoding_enhancement=Advanced Decoding
decoding_enhancement_tip=Enable to perform Base64 and CSS decoding based on the configurable rules below.
decoding_rule=Decoding Rules
up_symbol_success=Upload debug symbol file successfully.
debug_file=Debug Symbol File

decoding_enhancement:
new=New Decoding Rule
edit=Edit Decoding Rule
id=ID
url_type=URL Type
url_path=URL Path
count=Count
status=Status
simple=Simple String
regex=Regular Expression
parameter=Parameter
cookie=Cookie
new_field=New Field
edit_field=Edit Field
field_type=Field Type
field_name_type=Field Name Type
field_name=Field Name
base64_decoding=Base64 Decoding
css_decoding=CSS Decoding
err_url_pattern=The URL Path must start with '/'.
err_url_pattern_null=The URL Path can not be null.

replacemsg_image:
new=New Replacement Image
edit=Edit Replacement Image
name=Name
image=Image
content_type=Content Type
upload=Upload
message_tip=Maximum image size is 24 KB.
gif=GIF
tiff=TIFF
png=PNG
jpg=JPG
err_name=Name is invalid. The following characters are not allowed: % & ' '

replacemsg:
insert_image=Insert Image
insert_tag=Insert Tag
err_unsaved=You have unsaved changes to this report layout.
edit=Edit HTTP Response Code
new=New Replacement Message
edit_replacemsg=Edit Replacement Message
manage_images=Manage Images
alert=Security
site=Site Publish Authentication
url-block_name=Attack Block Page
url-block_desc=Replacement HTML for Attack Block Page
server-inaccessible_name=Server Unavailable Message
server-inaccessible_desc=Replacement HTML for Server Unavailable Message
login_name=Login Page
login_desc=Replacement HTML for Authentication Login Page
token_name=Token Page
token_desc=Replacement HTML for Token Authentication Page
rsa-login_name=RSA SecurID Login Page
rsa-login_desc=Replacement HTML for RSA SecurID Authentication Page
rsa-challenge_name=RSA SecurID Challenge Page
rsa-challenge_desc=Replacement HTML for RSA SecurID Challenge Page
change-passwd_name=Change Password Page
change-passwd_desc=Replacement HTML for Change Password Page
account-lockout_name=Account Lockout Page
account-lockout_desc=Replacement HTML for Account Lockout Page
account-auth-failed_name=Account Failed Authentication page
account-auth-failed_desc=Replacement HTML for Account Authentication Failed Page
name=Name
description=Description
modified=Modified
save=Save
restore=Restore Defaults
message_format=Message Format
message_size=Message Size
message_tag=Tag
retcode=HTTP Response Code
retcode_limit=is an invalid value.\nThe HTTP Response Code value must be an integer within 100~599.
tag_desc_IMAGE=You can upload images by navigating to System > Config > Replacement Messages and display images with the following HTML: &#60;img src=%%IMAGE: &#60;config_image_name&#62%% size=&#60;bytes&#62; &#62;.
tag_desc_URL=The URL of a web page blocked by web filtering or URL blocking, or the URL of a web page with a blocked file that a user attempted to download.
tag_desc_SOURCE_IP=The source IP address that accessed the web service.
tag_desc_DEST_IP=The IP address of the web server.
tag_desc_VSERVER_IP=The IP address of the virtual server
tag_desc_EVENT_ID=The Event ID number identifies the attack type and can be used to map the event to the log in the FortiWeb attack log
tag_desc_MSG_ID=The Message ID number identifies the attack log message id and can be used to map the event to the log in the FortiWeb attack log
tag_desc_USERNAME=The text entry field where a user can enter his or her username credential to login.
tag_desc_PASSWORD=The input type for a text entry field that prompts users to enter authentication credentials to login, in this case a password.
tag_desc_ORG_LOCATION_VAL=The original URL the client tried to access
tag_desc_REPLY_TAG=Reply message of authentication
tag_desc_URL_HIDDEN=
tag_desc_LOGIN_POST_URL=The login URL users post their credentials
tag_desc_TOKEN_POST_URL=The login URL users insert their token code
tag_desc_RSA_LOGIN_POST_URL=The login URL users post their RSA SecurID credentials
tag_desc_RSAC_POST_URL=The login URL users post their RSA SecurID token code
tag_desc_TOKENCODE=The code is a one time password generated by the FortiToken as part of the two factor authentication process.
tag_desc_sph_org_location=The keyword of the original URL which the user want to access before authentication
tag_desc_sph_username=The keyword of username for authentication
tag_desc_sph_password=The keyword of password for authentication
tag_desc_sph_token=The keyword of token code for two factor authentication
tag_desc_sph_passcode=The keyword of passcode for RSA SecurID authentication
tag_desc_sph_cpw=The keyword of enabling change password
tag_desc_sph_cancel=The keyword of cancellation
tag_desc_sph_new_pwd=The keyword of new password
tag_desc_sph_cfm_pwd=The keyword of confirmed password
tag_desc_DISPLAY_OR_HIDE=Display or hide the change password feature
tag_desc_ACCOUNT=Account Name
tag_desc_PERIOD_TIME=Block Period Time
admin=Administrators
post-login-disclaimer_name=Post-login Disclaimer Message
post-login-disclaimer_desc=Replacement message for post-login disclaimer
pre-login-disclaimer_name=Pre-login Disclaimer Message
pre-login-disclaimer_desc=Replacement message for pre-login disclaimer
captcha=Captcha Enforcement
captcha-page_name=Captcha Enforcement Page
captcha-page_desc=Replacement HTML for Captcha Enforcement Page
tag_desc_CAPTCHA_POST_URL=The URL users post their captcha code
tag_desc_CAPTCHA_VCODE_STR=The unique identification of captcha image
tag_desc_CAPTCHA_REQ_DATA=The HTTP request data which trigger captcha enforcement
tag_desc_CAPTCHA_IMG_SRC=The value of captcha iamge
captcha-block_name=Captcha Block Page
captcha-block_desc=Replacement HTML for Captcha Block Page

login_disclaimer:
read=Please read the following agreement carefully.
title=Login Disclaimer
accept=Accept
not_accept=Decline

fortisandbox:
header=FortiSandbox Settings
server=Server IP / Domain
test=Test Connectivity
ssl_check=Secure Connection
email=Admin Email
email_tips=Email to receive reports and notifications
interval=Statistics Interval
interval_tips=(1-60)minutes
statistics=FortiSandbox Statistics (Last 7 Days)
count=Count
malicious=Malicious
high_risk=High Risk
med_risk=Medium Risk
low_risk=Low Risk
clean=Clean
total=Total
type=FortiSandbox Type
type_app=FortiSandbox Appliance
type_cloud=FortiSandbox Cloud
fsa_status=FortiSandbox Status

err_server=is not a valid IP address or domain name.
email_err=Email Address format is invalid.
err_interval=The Statistics Interval must be between 1 and 60 minutes.
fail=Fail to connect to FortiSandbox.
unauthorized=Fail to Obtain FortiSandbox authorization.
success=Successfully!
unreachable=Route unreachable.
invalid_sn=FortiWeb invalid SN.
login_failed=Login FortiSandbox failed.
timeout_unit=(1-168)Hours
timeout=Cache Timeout
err_timeout=is not a valid value. \nThe value must be in 1~168.

wccp:
new=Create WCCP Client
edit=Edit WCCP Client
service_id=Service ID
cache_id=Cache ID
router_list=Router List
group_address=Group Address
port=Port
service_type=Service Type
auto=Auto
dynamic=Dynamic
standard=Standard
auth=Authentication
password=Password
cache_engine_method=Cache Engine Method
gre=GRE
l2=L2
primary_hash=Primary Hash
src_ip=Source IP hash
dst_ip=Destination IP hash
src_port=Source port hash
dst_port=Destination port hash
ports_defined=Ports defined service
ports_source=Ports source service
standard_bucket_format=Bucket format
cisco_implementation=Cisco bucket format
wccp_v2=WCCP-v2 bucket format
priority=Service Priority
protocol=Service Protocol
weight=Weight
err_service_id=is not valid Service ID value.Service ID number must be in 0~255
err_priority=is not valid Service Priority value.Service Priority number must be in 0~255
err_protocol=is not valid Service Protocol value.Service Protocol number must be in 1~255
err_weight=is not valid weight.Weight must be in 0~255
err_port=is not valid Port.Port must be in 0~65535
err_password=Password must be input.
err_service_id_1=Since Service ID 1 to 50 are reserved for well known services and not defined yet, so not allow to add WCCP Client with ID in the range 1 to 50.
err_ip=is not a valid IP.
err_blank=Port can not be empty.

fgt_integration:
edit=FortiGate Integration
fgt_ip=FortiGate IP Address
protocol=Protocol
username=Administrator Name
password=Administrator Password
err_ip=FortiGate IP Address must be input.
err_username=Administrator Name must be input.
err_fgt_port=FortiGate Port must be input.
err_sched_freq=Schedule Frequency must be input.
http=HTTP
https=HTTPS
schedule_frequency=Schedule Frequency
flag=Enable
fgt_port=FortiGate Port
err_port=is not a valid value.\nit must be in 1~65535.
err_freq=is not a valid value.\nit must be in 1~5.
hour=(Hour)

hsm:
header=HSM Configuration
server_ip=Server IP
server_port=Port
register=Create Client
upload=Upload Server Certificate File
download_file=Download Client Certificate File
download=Download
unregister=Destroy Client
timeout=Timeout
ms=ms
pri_timeout=is an invalid value.\nPeriod must be in 5000~20000.
slot_name=Partition Name
edit=Edit Partition
new=New Partition
pwd=Password
err_server_ip=Server IP must be input.
err_crtfile=Upload Server Certificate File should not be blank.
err_timeout=Timeout must be input.
err_server=is not a valid IP address.
msg_created=Successfully created.
msg_uncreated=There is no server exist.
return=Return
test=Partition Test
test_msg=The test process may need a few minutes. Confirm this operation?
test_success=Testing successful.
test_failed=Testing failed.
test_timeout=Testing timeout.

ha_topology:
ha_topology=HA Topology
status=STATUS
serial_number=Serial Number
hostname=Host Name
view_alog=View Attack Logs
view_elog=View Event Logs
view_tlog=View Traffic Logs
view_fortiguard=View FortiGuard Information
ip_addresse=IP Address
priority=Priority
click_to_show=Click to show device info.
this_host=This Host
mode_aa=Active-Active-Standard
mode_ap=Active-Passive
mode_standalone=Standalone
mode_cluster=Active-Active-High Volume
disconnect_label=Disconnect from cluster
view_ha_statistics=View HA Statistics
manager_topology=Manager Topology
view_manager_statistics=View Manager Statistics
primary_name=Primary Group
secondary_name=Secondary Group

device_tracking:
header=Device Tracking Settings
cleanup_period=Historical Threat Weight Cleanup Period
delete_time=Delete Inactive Records After
block_time=Block Duration
interval=Update Device Fingerprint After
query_timeout=Database Query Timeout
hours=0~12 hours
minutes=60~1440 minutes
seconds=1~30 seconds
days=0~30 days
never=Never
12hours=12 hours
24hours=24 hours
3days=3 days
1week=1 week
err_char= is not valid value\n
err_must= must be

fds:
fds_server_config=FDS Proxy
override=Override Default FortiGuard IP Address
port=FDS Proxy Listen Port
empty_port=FDS Proxy Listen Port is required.
err_range_port=is an invalid value.\nPort must be in 1~65535.
empty_ip=Override Default FortiGuard Address is required.
err_ip=is not a valid IP address.
scheduled_update=Scheduled Poll Update
update_now=Poll Now
every=Every
daily=Daily
weekly=Weekly
hour=hour
minute=minute
day=day
file=File
version=Version
fwdb_ver=Security Service
avdb_ver=Regular Virus Database
exavdb_ver=Extended Virus Database
aven_ver=Virus Engine
irfw_ver=IP Reputation
hcdb_ver=Credential Stuffing Defense
title_up=Update in Progress
message=Your update request has been sent. Your database will be updated in a few minutes. Please check your update page for the status of the update.
update_status=Current FDS Proxy status
stop_download=Stop Download
started_at=started at
done=done
task_idle=Update daemon is currently idle
task_speed_test=Update daemon is doing speed test of the FDS servers
task_setup=Update daemon is doing setup with FDS server
task_down_major=FDS Proxy daemon is downloading the essential packages
task_down_minor=FDS Proxy daemon is downloading the anti-virus packages
task_install=FDS Proxy daemon is installing packages
fds_server_option=FDS Proxy Options
file_information=File Information

visibility:
visibility_config=Feature Visibility
ftp_security=FTP Security
ftp_security_detail=Monitor and secure FTP connections including FTPS SSL offload, file scanning with AV and FortiSandbox and FTP security controls. Configure in FTP Security.
device_tracking=Device Tracking
device_tracking_detail=Identify requests by their device origin. Helps to accurately identify and track repeat offenders. Configure in Policy > Web Protection Profile.
auto_learn=Auto Learn
auto_learn_detail=Auto Learn builds a report of your application’s structure and can generate a security configuration for it. It is replaced with Machine Learning.
traffic_mirror=Traffic Mirror
traffic_mirror_detail=Mirror all traffic to third party devices per the Traffic Mirror policy in RP and TTP mode. Configure in Server Objects->Traffic Mirror.
mobile_app_identification=Mobile Application Identification
mobile_app_identification_detail=Identify requests from Mobile Applications using a JWT token. Configure in Policy > Web Protection Profile.
adfs_policy=ADFS Policy
adfs_policy_detail=Support Active Directory Federation Services(ADFS). Configure in Server Policy and Server Pool.

icap_server:
edit=ICAP Server Setting
server=Server IP / Domain
port=Port
cache_timeout=Cache Timeout 
cache_timeout_tip=(1-168)Hours
err_cache_timeout=is not a valid value.\nit must be in 1~168.
service_name=Service Name
ssl=Transmission Encryption
test_icap=Test ICAP
test_icap_success=Successfully connect to ICAP Server.
error-1=Error Invalid input parameter.
error-2=Failed to establish SSL connection to the ICAP Server.
error-3=Failed to connect to ICAP Server.
error-4=Failed to apply for memory.
error-5=Failed to connect ICAP Server service. 

fabric_connector:
header=Fabric Connectors
name=Name
platform_type=Platform Type
user_id=User ID
oci_tent_id=OCI tenant ID
compartment_id=OCI compartment ID
load_balancer_id=OCI LoadBalancer ID
server_region=OCI server Region
certificate=Certificate
select=Please Select
resouce_group=ResourceGroup Name
sub_id=Subscription ID
tenant_id=Tenant ID
app_id=Application ID
passwd=Application Password
nic1=Interface Name In FWB VMA
nic2=Interface Name In FWB VMB
test=Test
oci=OCI
azure=Azure
CA_Toronto=CA Toronto Server
EU_Frankfurt=EU Frankfurt Server
UK_London=UK London Server
US_Ashburn=US Ashburn Server
US_Phoenix=US Phoenix Server
AP_Tokyo=AP Tokyo Server
AP_Seoul=AP Seoul Server
private_key=Private Key
test_azure_success=Test Azure platform resource setting successfully.
test_azure_failed=Test Azure platform resource setting failed.
test_oci_success=Test OCI platform resource setting successfully.
test_oci_failed=Test OCI platform resource setting failed.
test_connector=Test for Connector Resource Setting
download_shell=Download Fortiweb Azure Resource Setting Powershell
invalid_pri_Key=Invalid private key file.
